Model 3820 Network Connection
Use the following procedures to connect a Model 3820 to the dial or 2-wire leased-line
network interface:
1. Insert the 6-position, 4-conductor modular plug into the jack labeled DIAL / LEASED
(3820).
2. Insert the other end of the modular cord into the network interface.
0
1
PWR
6-POSITION,
4-CONDUCTOR PLUG
FOR TELEPHONE SET
6-POSITION, 4-CONDUCTOR
PLUG FOR PERMISSIVE
DIAL NETWORK OPERATION
(CONNECTS WITH
RJ11C TYPE JACK)
2-WIRE LEASED-LINE
NETWORK OPERATION
(CONNECTS WITH
6-POSITION CENTER PAIR
LEASED JACK)
PHONE
DIAL
LEASED
LEASED
(3810)
(3820)
– OR –
5
NMS
DTE
HUBBING
DEVICE
98-16196