Paradyne COMSPHERE 3810 Quick Reference Manual page 10

Configuration Option Procedures – DCP Commands
1. Move to the Configure branch and select a configuration area to load from: Active
(Operating), Active (Saved), Customer 1, Customer 2, or Factory (Async Dial,
Sync Dial, Sync Leased, or UNIX Dial). If Enhanced Throughput Cellular (ETC) is
installed, Factory areas Cellular (Mobile) and Cellular (PSTN) are also available.
Select Configure from the Top-Level menu.
Idle : 19.2
Test
F1
Scroll to the area you wish to load.
Ld EditArea frm
Factory
F1
2. Select Edit to choose the set of configuration options to be edited: DTE Interface,
DTE Dialer, Line Dialer, Dial Line, Leased Line, V.42/MNP/Buffer, Tests, Misc, or
Security.
Edit StrapGroup
Test
F1
3. When the new configuration is completed, Save the edited configuration options to
the desired configuration area: Active (Saved), Customer 1, Customer 2.
Sav EditArea to
Active (Saved)
F1
Configure
F2 F3
<
F2 F3
<
Misc
F2 F3
>
F2 F3
8