Paradyne COMSPHERE 3810 Quick Reference Manual page 6

Model 3810 Dial Connection
For the Model 3810, use the following procedures to connect the modem to the dial
network interface:
1. Insert the 6-position, 4-conductor modular plug into the jack labeled DIAL / LEASED
(3820).
2. Insert the other end of the modular cord into the network interface.
Model 3810 Leased-Line Connection
Use the following procedures to connect a Model 3810 to the 2-wire or 4-wire
leased-line network interface:
1. Insert the 8-position, 8-conductor modular plug into the jack labeled
PHONE / LEASED (3810).
2. Insert the other end of the modular cord into the leased-line network interface.
0 1
PWR
6-POSITION,
4-CONDUCTOR PLUG
FOR TELEPHONE SET
8-POSITION,
8-CONDUCTOR PLUG
FOR LEASED LINE
NETWORK OPERATION
(CONNECTS WITH
JM8 TYPE JACK)
6-POSITION,
4-CONDUCTOR PLUG
FOR PERMISSIVE
DIAL NETWORK
OPERATION
(CONNECTS WITH
RJ11C TYPE JACK)
PHONE DIAL
LEASED LEASED
(3810) (3820)
4
NMS
DTE
HUBBING
DEVICE
98-16197