Miele HM1680D Operating Instructions Manual page 5

~
Before connecting the appliance,
ensure that the connection data on the
data plate (fusing, voltage and
frequency) match the household
electrical supply. If in doubt, consult an
electrician.
~
To reduce the likelihood of circuit
overload, do not operate another high
wattage appliance on the same circuit.
~
Do not modify the machine power
cord or plug.
~
To reduce the risk of electric shock,
do not immerse the appliance in water
or other liquids.
~
All electrical work should be carried
out by a qualified electrician in
accordance with local and national
safety regulations.
~
To reduce the risk of electric shock,
do not disassemble or attempt to tepair
the appliance, take it to a qualified ser-
vice person for examination an repair.
~
To guarantee the electrical safety of
this appliance, continuity must exist
between the appliance and an effective
grounding system. It is imperative that
this basic safety requirement be met. If
there is any doubt, have the electrical
system of the house checked by a
qualified electrician. The manufacturer
cannot be held responsible for
damages caused by the lack, or
inadequacy, of an effective grounding
system.
IMPORTANT SAFETY INSTRUCTIONS
~
connect this appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
~
from the electricity supply when:
– it is turned off at the wall switch and
– the circuit breaker has been
~
the safety components or control
elements in the iron.
~
removable outer casings are fitted so
that it is impossible to touch an
electrical component or moving part.
~
designed for maritime use or for use in
mobile installations such as aircraft or
recreational vehicles. However, under
certain circumstances it may be
possible for an installation in these
applications. Please contact the
nearest Miele Dealer or Miele Technical
Service with specific requirements.
Do not use an extension cord to
The appliance is completely isolated
unplugged, or
"tripped".
Do not damage, remove, or bypass
Only operate the rotary iron when all
This equipment has not been
5