Table of Contents
Advertisement
SETTING THE TIME
When power is supplied, "88:88" and then "12:00" is automatically displayed on the
display.
Please set the current time. The time can be displayed in either the 24-hour or 12-hour
notation. You must set the clock:
• When you first install your microwave oven
• After a power failure
Do not forget to reset the clock when you switch to and from summer and winter
time.
1. Press the Multi Function Selector Dial.
2. Turn the Multi Function Selector Dial to set time display
type. (12H or 24H)
3. Press the Multi Function Selector Dial to complete the
setup.
4. Turn the Multi Function Selector Dial to set the hour.
5. Press the Multi Function Selector Dial.
6. Turn the Multi Function Selector Dial to set the minute.
7. When the right time is displayed, press the Multi Function
Selector Dial to start the clock.
Result:
The time is displayed whenever you are not
using the microwave oven.
COOKING/REHEATING
The following procedure explains how to cook or reheat food.
ALWAYS check your cooking settings before leaving the oven unattended.
Open the door. Place the food in the centre of the turntable. Close the door. Never switch
the microwave oven on when it is empty.
1. Press the Microwave button.
2. Turn the Multi Function Selector Dial until the appropriate
3. Set the cooking time by turning the Multi Function
4. Press the START/+30s button.
English - 12
Result:
The following indications are displayed:
(microwave mode)
power level is displayed.
At that time, press the Multi Function Selector Dial to set
the power level.
• If don't set the power level within 5 seconds,
Automatically changes to the cooking time setting stage.
Selector Dial.
Result:
The cooking time is displayed.
Result:
The oven light comes on and the turntable starts
rotating. Cooking starts and when it has finished.
• The oven beep and flash "End" 4 times.
The oven will then beep one time per minute.
Advertisement
Table of Contents
