Paradyne 6310 Installation Instructions Manual page 6

4. Use an 8-pin Ethernet cable for the Ethernet connection. Insert one end of the cable
into the jack labeled ETHERNET.
— Use a straight-through cable and connect the other end to an Ethernet hub.
(To connect to a hub's Uplink connection, use an Ethernet crossover cable).
Ethernet
Hub
6
7
8
–or–
— Use an Ethernet crossover cable and connect the other end to a PC with an
Ethernet Network Interface Card (NIC) installed.
PC with Ethernet
Network Interface
Card
1
2
3
4
5
Ethernet
Straight-Through
Cable
Ethernet
Crossover
Cable
Ethernet
Line
Ethernet
Line
6
01-17008
01-17009