Optional ReachDSL Modem Wall Placement
The Hotwire 6310 ReachDSL v1 Modem is designed for tabletop placement. The
ReachDSL modem can also be mounted on a wall. To mount the modem, you will need:
Two slotted-head #6 self-threading screws with plastic anchors
Drill and 3/16" drill bit for the plastic anchors
Screwdriver
A template with the dimensions for the two screws is provided. See
Hardware Template
Procedure
To mount the Hotwire 6310 ReachDSL v1 Modem:
1. Use a drill to install the plastic anchors.
2. Use a screwdriver to install the screws. Do not install the screws flush with the wall.
Leave enough clearance to hang the modem housing from the screws.
Hotwire
ReachDSL
Modem
on page 14.
13
ReachDSL Modem
Wall
Fasteners
01-17004