Table of Contents
Advertisement
Quick Links
Hotwirer 6310 MVLt Modem Customer Premises
Installation Instructions
Document Number 6310-A2-GN10-40
February 2000
Contents
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hotwire 6310 MVL Modem Overview
The Hotwirer 6310 MVLt (Multiple Virtual Lines) Modem is a component in the
Hotwire MVL System and interoperates with the Hotwire 8310 or 8312 MVL Card in the
DSLAM (Digital Subscriber Line Access Multiplexer) system. This system provides
high-speed Internet or corporate LAN access over traditional twisted-pair copper
telephone wiring.
The MVL technology:
H
Transforms a single copper pair into multiple virtual lines to support multiple
services simultaneously.
H
Operates over existing copper wire with existing telephone jacks.
H
Provides rate adaptive data rates to dynamically adapt and allocate bandwidth to
optimize applications.
H
Supports simultaneous multiple access of four MVL modems with up to
254 end-user systems sharing one common WAN interface.
H
Features HomeLink which provides peer-to-peer communications, including print
and file sharing applications.
H
Utilizes a POTS (plain old telephone service) splitterless environment at the
customer premises.
H
Provides ability to obtain software upgrades online.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
3
4
7
8
9
10
15
Advertisement
Table of Contents
Related Manuals for Paradyne 6310 MVLT
Summary of Contents for Paradyne 6310 MVLT
-
Page 1: Table Of Contents
Important Safety Instructions Hotwire 6310 MVL Modem Overview The Hotwirer 6310 MVLt (Multiple Virtual Lines) Modem is a component in the Hotwire MVL System and interoperates with the Hotwire 8310 or 8312 MVL Card in the DSLAM (Digital Subscriber Line Access Multiplexer) system. This system provides high-speed Internet or corporate LAN access over traditional twisted-pair copper telephone wiring. - Page 2 MVL. Customer Premises (CP) 6035 Phone Filter RJ11 Wall Jack Customer Premises (CP) Modem MVL/POTS Ethernet Crossover Cable MVL Modem End-user Ethernet Systems Cable (up to 32) 98-15930a-02 MVL Modem POTS Filter 99-16580 RJ11 Wall Jack...
-
Page 3: Before You Begin
— A telephone is used to represent any equipment that plugs into a phone jack and uses the POTS line, such as a phone, modem, or fax machine. — End-user system is used to represent any PC with an Ethernet connection and MVL-based service. -
Page 4: Installing The Hotwire Mvl Modem
Document Number Document Title 6035-A2-GN11 6040-A2-GN11 Contact your sales or service representative to order additional product documentation. Paradyne documents are available on the World Wide Web at www.paradyne.com. Select Library Technical Manual Installing the Hotwire 6310 MVL Modem Place the Hotwire 6310 MVL Modem on a flat surface with clearance for the rear connectors. - Page 5 The 6035 phone filter has a cable attached. Plug the other end of this cable into the MVL modem jack labeled PHONE. Using the existing telephone interface cable that was unplugged in Step 1, plug into the POTS filter jack labeled PHONE.
- Page 6 Network Interface Card For MVL modem cable pin assignments, refer to Cables & Connectors on page 10. 5. Insert the supplied power cord’s round end into the jack labeled POWER. Attach the supplied ferrite choke as closely as possible to the MVL modem. Pass the cable through the ferrite choke twice, creating a loop as shown.
-
Page 7: Power-On
The MVL modem hardware installation is now complete. When the power cord is installed, the MVL modem goes through a power-on self-test. Power-On When power is applied, the MVL modem performs self-diagnostics and the PWR LED is on. The self-diagnostics includes a power-on self-test and all of the LEDs turn on for one second. -
Page 8: Troubleshooting
Troubleshooting LED Symptom Action All LEDs are on. If LEDs remain on after ten minutes, the modem is not functional. Contact the Service Provider. ALM LED remains The power-on self-test may have failed. Unplug the unit and reapply power. If the alarm LED is still on, contact the Service Provider. -
Page 9: Mvl Homelink
To improve data transmission throughput and minimize background noise during a telephone conversation, make sure that: The Hotwire 6310 MVL modem is always powered on, even when not in use, and A Hotwire MVL phone filter is installed on every telephone. -
Page 10: Cables & Connectors
Cable Increasing the Number of End-User Systems A single end-user system is attached to the Hotwire 6310 MVL Modem by using an Ethernet crossover cable. To increase the number of end-user systems, connect all the PCs to an Ethernet hub using a straight-through cable. - Page 11 10BaseT RX D+ 4 & 5 Not used 10BaseT RX D– 7 & 8 Not used — To connect the MVL modem directly to a PC with an Ethernet NIC card, use an Ethernet crossover cable. 8-Pin Ethernet Crossover Cable Function 10/100BaseT TX D+ 10/100BaseT TX D–...
- Page 12 Optional MVL Modem Wall Placement The Hotwire 6310 MVL Modem is designed for tabletop placement. The MVL modem can also be mounted on a wall. To mount the modem, you will need: Three slotted-head #6 self-threading screws with molly bolts Drill and 3/16”...
- Page 13 MVL Modem Hardware Template 5.43" Front (LEDs) 7.55" To Bottom Hole 98-16171...
- Page 14 Hotwire 6310 MVL Modem Technical Specifications Item Height x Width x Depth Weight Power Class 2 Transformer normal service input voltage range Approvals FCC Part 15 CISPR 22 Safety Certifications Physical Environment Operating temperature Storage temperature Relative humidity Shock and vibration...
-
Page 15: Important Safety Instructions
Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product or included in the manual. 2. Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these slots and openings must not be blocked or covered. - Page 16 CE Marking When the product is marked with the CE mark on the equipment label, this demonstrates full compliance with the following European Directives: Directive 73/23/EEC – Council Directive of 19 February 1973 on the harmonization of the laws of the member states relating to electrical equipment designed for use within states relating to electrical equipment designed for use within certain voltage limits, as amended by Directive 93/68/EEC.
-
Page 17: Declaration Of Conformity
Declaration of Conformity This Declaration of Conformity is made by Paradyne Corporation pursuant to Parts 2 and 15 of the Federal Communications Commission’s Rules. This compliance information statement pertains to the following products: Trade Name: Hotwire Model Number: 6310-A2-200 This device complies with Part 15 of the FCC Rules. Operation is subject to the... - Page 18 — Internet: Visit the Paradyne World Wide Web site at www.paradyne.com. — Telephone: Call our automated system to receive current information via fax or to speak with a company representative.
- Page 19 Notice to Users of the Canadian Telephone Network The Industry Canada label identifies certified equipment. This certification means that the equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction.
-
Page 20: Document Feedback
Trademarks Hotwire is a registered trademark of Paradyne Corporation. MVL is a trademark of Paradyne Corporation. All other products and services mentioned herein are the trademarks, service marks, registered trademarks, or registered service marks of their respective owners.