ICON Health & Fitness FREEMOTION 350R User Manual page 14

13. Identify and orient the Rear Upright Cover (57)
as shown.
Attach the Rear Upright Cover (57) to the Upright
(2) with an M4 x 16mm Screw (77).
14. Untie and discard the wire ties on the Main
Wire (43), the Frame Pulse Wire (42), and the
Receiver Wire (40).
While a second person holds the Console (4)
near the Upright (2), connect the wires on the
Console to the Main Wire (43), to the Frame
Pulse Wire (42), and to the Receiver Wire (40).
Insert the excess wire into the Upright (2).
Tip: Start all the screws before tightening
any of them. Also, avoid pinching the wires.
Attach the Console (4) to the Upright (2) with
four M4 x 16mm Screws (77).
15. Identify and orient the Front Upright Cover (58)
as shown.
Attach the Front Upright Cover (58) to the
Upright (2) with two M4 x 16mm Screws (77).
13
57
77
14
4
Avoid pinching
the wires
15
14
2
2
77
43
42
40
77
58
2