Advertisement
Quick Links
nordictrack.com
Model No. NTEX02722.1
Serial No.
Write the serial number in the space
above for reference.
Serial Number
REGISTER YOUR
PRODUCT
To register your product and
activate your warranty today,
go to my.nordictrack.com.
MEMBER CARE
For service at any time, go to
my.iFIT.com.
Or call 1-833-680-IFIT
(1-833-680-4348)
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–12 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and
instructions in this manual before
using this equipment. Keep this
manual for future reference.
Decal
USER'S MANUAL
Advertisement
Related Manuals for ICON Health & Fitness NordicTrack S27i
Summary of Contents for ICON Health & Fitness NordicTrack S27i
- Page 1 nordictrack.com USER’S MANUAL Model No. NTEX02722.1 Serial No. Write the serial number in the space above for reference. Serial Number Decal REGISTER YOUR PRODUCT To register your product and activate your warranty today, go to my.nordictrack.com. MEMBER CARE For service at any time, go to my.iFIT.com.
- Page 2 TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. . .2 IMPORTANT PRECAUTIONS .
- Page 3 IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your studio cycle before using your studio cycle. iFIT assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
- Page 4 STANDARD SERVICE PLANS...
- Page 5 BEFORE YOU BEGIN Congratulations for selecting the revolutionary For your benefit, read this manual carefully before NORDICTRACK COMMERCIAL S27I. The you use the studio cycle. If you have questions after ® COMMERCIAL S27I is unlike any ordinary exercise reading this manual, please see the front cover of this bike.
- Page 6 PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly.
- Page 7 ASSEMBLY 1. To use the assembly steps in this manual, first see the helpful tips below. • Assembly requires two persons. • In addition to the included tool(s), assembly requires the following tool(s): • Place all parts in a cleared area and remove the one Phillips screwdriver packing materials.
- Page 8 2. See the inset drawing. Orient the Handlebar Post (7) so that the lower slot (A) is on the side shown. Next, loosen the indicated Post Knob (100) and insert the Handlebar Post (7) all of the way into the Frame (1). Make sure that the indicated slots (B) are aligned.
- Page 9 4. Remove the Mount Cover (153) from the Console Support (8), if necessary. Then, pull the wires (E) out of the Console Support. Make sure that the wires are behind the Console Bracket (11). Then, press the Mount Cover (153) into place on the Console Support (8).
- Page 10 6. Look under the Console Support (8) and identify the Upper Wire (123), which has a larger con- nector than the Extension Wire (124). Connect the Upper Wire (123) to the Lower Wire (122) extending from the Handlebar Post (7). Tip: The wire connectors should slide together easily and snap into place with an audible click.
- Page 11 8. Note: For clarity, the Console and the wires are not shown in the drawing. Tilt the Console (not shown) upward and down- ward a few times. If the movement feels too loose, tighten the four M6 x 15mm Cap Screws (157) in the Rear Bracket Mount (114) until the movement no longer feels loose.
- Page 12 10. Orient the Lower Console Cover (154) as shown and press it onto the back of the Console (10). Position the wires (not shown) in the indicated notch (I). Tip: Avoid pinching the wires. Orient the Upper Console Cover (155) as shown and press it onto the back of the Console (10).
- Page 13 12. Position the wires (E, F) so that they fit neatly in the underside of the Hand Weight Tray (38). Orient the Tray Cover (106) so that the curved opening (L) is in the location shown. Then, align the Tray Cover with the Hand Weight Tray (38). E, F Tip: Avoid pinching the wires (E, F).
- Page 14 14. Set the two Hand Weights (14) in the Hand Weight Tray (38). IMPORTANT: Make sure not to hit the Console (10) with the Hand Weights (14) when you set the Hand Weights in the Hand Weight Tray (38) after each use. 15.
- Page 15 HOW TO USE THE STUDIO CYCLE HOW TO PLUG IN THE POWER ADAPTER FEATURES OF THE STUDIO CYCLE IMPORTANT: If the studio cycle has been exposed Measuring Watts to cold temperatures, allow it to warm to room tem- Each studio cycle is calibrated to measure your power perature before you plug in the power adapter (A).
- Page 16 To adjust the saddle HOW TO ADJUST THE GEOMETRY OF THE post, loosen the STUDIO CYCLE post knob (D), The studio cycle can be adjusted to match the geom- move the saddle etry of your road bike to promote correct form and to post upward or ensure proper training of the muscles.
- Page 17 The spring tension HOW TO LEVEL THE STUDIO CYCLE affects how easy or If the studio cycle difficult it is to clip in rocks slightly on and unclip from the your floor during pedals. To adjust use, turn one or the spring tension NordicTr both of the leveling...
- Page 18 HOW TO USE THE CONSOLE CONSOLE DIAGRAM When you use the manual mode of the console, you FEATURES OF THE CONSOLE can change the resistance of the pedals and the incline The advanced console offers an array of features of the frame with the touch of a button. designed to make your workouts more effective and enjoyable.
- Page 19 HOW TO TURN ON THE CONSOLE HOW TO USE THE TOUCH SCREEN The included power adapter must be used to operate The console features a tablet with a full-color touch the studio cycle. See HOW TO PLUG IN THE POWER screen.
- Page 20 HOW TO SET UP THE CONSOLE Firmware updates are always designed to improve your exercise experience. As a result, Before you use the studio cycle for the first time, set up new settings and features may not be described the console. in this manual.
- Page 21 Note: To view the resistance or incline sliders on HOW TO USE THE MANUAL MODE the screen, touch the screen in any open space and then touch the controls options to enable this 1. Touch the screen or press any button on the feature.
- Page 22 5. Wear a compatible heart rate monitor and THE OPTIONAL HEART RATE MONITOR measure your heart rate if desired. Whether your You can wear a compatible heart rate monitor (not goal is to included) to measure your heart rate. The console burn fat or to is compatible with all Bluetooth Smart heart rate...
- Page 23 When you select a workout, the screen will show HOW TO USE A FEATURED WORKOUT an overview of the workout that includes details To use a featured workout, the console must be con- such as the duration and distance of the workout nected to a wireless network (see HOW TO CONNECT and the approximate number of calories you will TO A WIRELESS NETWORK on page 29).
- Page 24 IMPORTANT: The calorie goal shown in the 5. Wear headphones if desired. workout description is an estimate of the To connect your headphones to the console, first number of calories that you will burn during turn on your headphones, place them in pairing the workout.
- Page 25 If you make a mistake, touch Undo in the map HOW TO CREATE A DRAW-YOUR-OWN-MAP options. WORKOUT The screen will display the elevation and distance 1. Touch the screen or press any button on the statistics for your workout. console to turn on the console. See HOW TO TURN ON THE CONSOLE on 4.
- Page 26 HOW TO USE AN IFIT WORKOUT 4. Select an iFIT workout from the home screen or the workout library. To use an iFIT workout, you must be logged into your iFIT account (see step 3 below) and the console Touch the buttons at the bottom of the screen to must be connected to a wireless network (see HOW select either the home screen (Home button) or the TO CONNECT TO A WIRELESS NETWORK on...
- Page 27 When your headphones and the console pair 6. Create a list of favorite iFIT workouts if desired. successfully, the audio from the console will play To mark an iFIT workout as a favorite, simply view through your headphones. the overview or workout summary of the desired iFIT workout and touch the favorites button (heart 9.
- Page 28 HOW TO CHANGE CONSOLE SETTINGS 3. Customize workout settings. To customize workout settings and enable workout IMPORTANT: Firmware updates are always features, touch In Workout, and then touch the designed to improve your exercise experience. As a result, new settings and features may not be described desired settings.
- Page 29 7. Calibrate the incline system. 3. Enable Wi-Fi. To calibrate the incline system, touch Maintenance, Make sure that Wi-Fi is enabled. If it is not ® touch Calibrate Incline, and then touch Begin. The enabled, touch the Wi-Fi toggle to enable it. frame will automatically rise to the maximum incline level, lower to the minimum incline level, and then 4.
- Page 30 FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Page 31 MAINTENANCE AND TROUBLESHOOTING and then turn back on. If it does not, press the power MAINTENANCE switch and unplug the power adapter, and then plug it Regular maintenance is important for optimal in again and press the power switch. Once the con- performance and to reduce wear.
- Page 32 INCLINE SYSTEM TROUBLESHOOTING HOW TO ADJUST THE REED SWITCH If the frame does not move to the correct incline level, If the console does not display correct feedback, the see HOW TO CHANGE CONSOLE SETTINGS on reed switch should be adjusted. page 28 and calibrate the incline system.
- Page 33 HOW TO ADJUST THE DRIVE BELT If you can feel the pedals slip while you are pedaling, even when the resistance is adjusted to the highest setting, the drive belt may need to be adjusted. To adjust the drive belt, first press the power switch and unplug the power adapter.
- Page 34 EXERCISE GUIDELINES Aerobic Exercise—If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning this exercise, which is activity that requires large amounts or any exercise program, consult your physi- of oxygen for prolonged periods of time. For aerobic cian.
- Page 35 PART LIST Model No. NTEX02722.1 R1221B Key No. Qty. Description Key No. Qty. Description Frame Resistance Disc Base Lower Saddle Clamp M10 Washer Upper Saddle Clamp Roller Saddle M6 Shoulder Screw Anchored Zip Tie Inner Leg Sleeve Roller Axle Handlebar Post #8 x 1/2"...
- Page 36 Key No. Qty. Description Key No. Qty. Description Carriage Knob Plastic Spacer M6 x 20mm Machine Screw M10 Locknut M4 x 10mm Machine Screw Shoe Pin Incline Motor Sleeve Pulley Magnet Cleat Assembly M6 x 15mm Screw Tray Cover Thrust Washer M4 x 15mm Machine Screw Brake Knob Cap M6 Washer...
- Page 37 EXPLODED DRAWING A Model No. NTEX02722.1 R1221B 86 57...
- Page 38 EXPLODED DRAWING B Model No. NTEX02722.1 R1221B...
- Page 39 EXPLODED DRAWING C Model No. NTEX02722.1 R1221B...
- Page 40 ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...