9. Attach the Backrest Cover (36) to the Backrest
(8) with two M6 x 18mm Screws (75).
10. Orient the Upright (2) and the Top Shield (44)
as shown. Slide the Top Shield upward onto the
Upright.
Have a second person hold the Upright (2)
and the Top Shield (44) near the Frame (1) until
step 11.
Locate the wire ties in the Upright (2). Tie the
lower end of one wire tie to the Main Wire (43)
and to the Frame Pulse Wire (42). Tie the end of
the other wire tie to the end of the Receiver Wire
(40). Next, pull the upper ends of the wire ties
upward out of the top of the Upright.
Tip: To prevent the wires from falling into the
Upright (2), secure the wires with the wire
ties.
9
8
36
75
75
10
Wire Ties
44
12
2
Wire
Ties
42
43
1
40