Table of Contents
Advertisement
F-76
CURRENT TRANSDUCER REMOVAL AND REPLACEMENT (continued)
PROCEDURE
1. Remove input power to the POWER WAVE
355M/405M.
2. Using a 5/16" nut driver remove the case wrap-
around cover.
3. Perform the Input Filter Capacitor Discharge
Procedure detailed earlier in this section.
Plastic
Nut
TROUBLESHOOTING AND REPAIR
FIGURE F.35 – CASE BACK SCREW LOCATIONS
5/16" Mounting Screws
POWER WAVE
4. Using a 5/16" nut driver remove the four screws
®
from the bottom and right side of the rear assem-
bly. See Figure F.35.
REAR
O FF
O FF
O FF
O FF
OFF
OFF
®
355M/405M
F-76
Advertisement
Chapters
Table of Contents
