Remote Control - Zenith VCS442 Installation And Operating Manual

REMOTE CONTROL

The remote control is used for most of the operations and features of the VCR. Before
proceeding, put batteries in the remote and become familiar with the buttons. Use only type
AAA batteries. The maximum operating distance is about 25 feet.
The POWER, N (PLAY), P/STILL, FF, REW and REC/ITR buttons on the remote control unit
perform the same functions as the corresponding buttons on the VCR. The following buttons
are on the remote control unit only.
EJECT
To eject the tape in the VCR (page 18).
TV Control Buttons
You can control the sound level, input source, and
power switch of your LG TV with the supplied remote
(page 36).
STOP
To stop playback or recording (pages 21, 25).
INPUT
Select the VCR's line input or tuner.
CH/TRK (channel/tracking) (
• To scan up or down through memorized channels
(page 16).
• To manually adjust the tape's picture onscreen
(page 21).
D D E E F F G G ARROWS
Move up, down, left, right one row, column, or selection
(hold to repeat) (pages 14, 15).
ENTER
Accesses the onscreen menu (page 14).
Displays functions on the TV screen. Switches among
the clock, tape counter and tape remaining modes on
the display (pages 13, 34).
TV/VCR
To view channels selected by the VCR tuner or by the
TV tuner (pages 10, 25).
SLOW
For slow motion playback (pages 24).
ez POWER OFF
See page 31.
CM SKIP
To fast forward picture search through 30 seconds of
recording (page 24).
ez REPEAT
Replays the specified segment twice.
D D / E E )
11