Viewing Tv Only - Zenith VCS442 Installation And Operating Manual

CHANNEL SELECTION (Cont'd)
MAIN MENU
TUNING MENU

VIEWING TV ONLY

Turn on the TV and tune it to the
channel that you wish to watch.
Set POWER to OFF.
TO ADD OR ERASE CHANNELS FROM MEMORY
This feature allows you to add or erase channels from memory
manually.
1.
Press MENU and the MAIN menu will appear.
2.
Use or to select the TUNING menu option, then press
D D E E
ENTER. The TUNING menu will appear.
3.
Use to choose the CH. ADD/DEL option. Use
E E
select a channel to add or erase.
4.
Use ENTER to add or erase the channel.
Repeat steps 3 and 4 to add or erase channels.
5.
Press MENU to return to the TV screen.
You don't need to disconnect the VCR from the TV to watch TV
separately. When the VCR's power is OFF, or when the VCR's
power is ON and the TV/VCR selector is set to TV, the TV will
operate as if it were connected directly to the antenna or cable.
• The power cord must be plugged into an AC outlet.
• To view or record cable TV programs with the VCR, the VCR's
TUNING BAND option must be set to CATV (TUNING menu).
• Do not place the VCR directly on top of the TV. This may
cause interference in the picture and sound (of the VCR) dur-
ing the recording or playback mode. If this interference
occurs, move the VCR away from the TV.
or to
F F G G
17