Special Effects Playback - Zenith VCS442 Installation And Operating Manual

SPECIAL EFFECTS PLAYBACK

These special effects are available during playback.
TO WATCH A STILL (or Frame Advance) PICTURE
During PLAYBACK mode...
1.
Press P/STILL.
Still picture will appear on the TV screen.
• If a still picture vibrates vertically, stabilize it by pressing
CH/TRK ( D D / E E ) on the remote control.
• If the VCR is left in the STILL mode for more than 5 minutes,
the VCR will automatically enter the STOP mode to protect
the tape and video heads.
2.
Press P/STILL repeatedly to advance the video picture one
frame at a time while viewing a still picture.
3.
To continue normal playback, press N (PLAY).
VISUAL SEARCH FUNCTION
This function lets you quickly and visually search for a desired
tape section in either direction: forward or reverse.
During PLAYBACK mode...
1.
Press desired search button (FF or REW).
The VCR will be activated in the SEARCH mode and CUE or
REV will appear on the VCR indicator panel.
• If the VCR is left in the SEARCH mode for more than 3 min-
utes, the VCR will automatically enter the PLAY mode, to
protect the tape and video heads.
2.
To continue normal playback, press N (PLAY).
LOGIC SEARCH FUNCTION
The VCR must be in the STOP Mode.
1.
Press FF or REW once. Fast winding begins.
2.
Press and hold FF or REW again.
Visual search (Cue/Review) begins so you can check what is on
the tape.
• The CUE or REVIEW mode will continue until the FF or REW
button is released.
3.
When released, Fast Forward or Rewinding resumes.
23