Control Names And Locations - Zenith VCS442 Installation And Operating Manual

CONTROL NAMES AND LOCATIONS

FRONT
CASSETTE COMPARTMENT
Where the video cassette is inserted.
POWER
To turn the VCR on and off.
While plugged into an AC
outlet, the VCR consumes
1W of electrical power in
OFF condition.
STOP/EJECT
To stop the tape.
To eject the tape in the VCR.
CHANNEL ( D D / E E )
To scan up or down through
memorized channels (page 16)
or to manually adjust the tape's
picture onscreen (page 21).
VIDEO IN/AUDIO IN (L/R) JACKS (LINE)
Connect the audio/video output cable from
an external unit (Audio system, TV/Monitor,
Another VCR) to these jacks.
Use INPUT on remote to select an A/V input
channels (AV).
8
P/STILL
To put playback on still (page 23) or
to pause recording (page 25).
REC/ITR
To record normally (page 25) or to
activate Instant Timer Recording
(page 29).
INFRARED REMOTE SENSOR
Receives the signal from the
infrared remote control.
VCR Function Indicator Panel
Details are on the next page.
REW (Rewind)
To rewind the tape during the STOP
mode or for fast reverse picture
search (page 23).
PLAY
To play back a recorded tape
(page 21).
FF (Fast Forward)
To advance the tape during the STOP mode
or for fast forward picture search (page 23).