Onscreen Display (Osd) - Zenith VCS442 Installation And Operating Manual

ONSCREEN DISPLAY (OSD)

PLAY HI-FI CH 4
SP STEREO
JUL 5 , MON 2:15 PM
PREPARATION
• Turn on the power of both the VCR and TV.
• Tune the TV to the VCR output channel (CH 3 or 4).
• If a direct VIDEO/AUDIO connection is made between the
VCR and the TV, set the TV's source selector to VIDEO.
ONSCREEN FUNCTION DISPLAYS
Some of these functions will be displayed every time the VCR is
operated.
FUNCTION DISPLAY
Indicates the function in progress.
HI-FI DISPLAY
Indicates the unit is playing back a tape recorded in HI-FI.
CHANNEL DISPLAY
Indicates the selected channel (or AV).
STEREO/SAP DISPLAY (MONO is not displayed)
Shows the type of audio signal received by the VCR tuner.
TAPE SPEED DISPLAY
Shows the current tape speed.
CLOCK/COUNT/REMAIN DISPLAY
Shows the current time, the tape counter, and remaining time
on the tape.
DATE DISPLAY
Shows the current date. (Month/Date/Day of the week format)
Each press of the ENTER changes the TV screen in the
following sequence.
STOP CH 4
SP STEREO
JUL 5 , MON 2:15 PM
• The function displays can be seen displayed on the TV screen
for 5 seconds.
• The clock (or tape counter, tape remaining) mode will remain
on the screen until you press ENTER.
• The tape counter and the remaining tape length indicator
appear only when a cassette is inserted. Also, the remaining
tape length indicator appears after any tape operation.
2:15 PM
0:35:40
REM 1:58
13