Table of Contents
Advertisement
CANbridge NT 200 and 420
Add-Ons for Customer Specific Expansions
• Expert mode
• Communication Error Severity
• Action Rules
4.3.2. Bridge
The Bridge mode allows free configuration of the transmission of CAN messages. With the CANbridge NT 420 NT
bridging between Classic CAN and CAN FD is possible.
The following settings and features are possible:
• Use of Lua ADK
• Expert mode
• Communication Error Severity
• Action Rules
• Mapping table
• J1939 Mapping
• CAN FD/CAN Demultiplexing (only CANbridge NT 420)
• CAN/CAN FD Multiplexing (only CANbridge NT 420)
• Cyclic transmission
• CAN tunnel to transmit messages between two Classic CAN networks via a CAN FD network(only CANbridge NT
420)
4.4. Add-Ons for Customer Specific Expansions
Lua ADK
With the Lua Application Development Kit customer specific Lua scripts can be executed on the device in
operational mode Bridge. By using the Lua ADK for handling and processing of communication data the
functionality of the standard application can be expanded.
For more information about the Lua ADK see User Manual CAN@net NT/CANbridge NT Lua ADK on the product
support pages on www.ixxat.com/support-bridges-gateways.
Page 6 of 24
4.01.0331.20000 Version 2.0
Advertisement
Table of Contents
Need help?
Do you have a question about the Ixxat CANbridge NT 200 and is the answer not in the manual?