Safety Symbols - EGO PRO X HTX5300-PA Manual

Original instructions
READ ALL INSTRUCTIONS!
READ OPERATOR'S MANUAL
WARNING:
To ensure safety and reliability, all repairs should be performed by a qualified service technician.
WARNING:
Be sure to read and understand all safety instructions in this Operator's Manual, including all safety
alert symbols such as "DANGER," "WARNING," and "CAUTION" before using this tool. Failure to follow all instructions
listed below may result in electric shock, fire, and/or serious personal injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.

SAFETY SYMBOLS

WARNING:
The operation of any power tools can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side
shields and a full face shield when needed. We recommend a Wide Vision Safety Mask for use over eyeglasses or standard
safety glasses with side shields.
Safety Alert
Guaranteed sound power level. Noise emission to the
XX
environment according to the European community's
Directive.
Wear Eye Protection
Wear Head Protection
Keep hands and feet away from the cutting tool.
Wear Protective Gloves
Bluetooth
®
IPX5 Protection against water jets
.../min Per Minute
NOTE:
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, inc. and any use of such
®
marks by EGO is under license.
56 VOLT LITHIUM-ION CORDLESS ARTICULATING POLE HEDGE TRIMMER— HTX5300-PA
To reduce the risk of injury, user must read the
operator's manual.
To prevent electrocution, do not operate within 15m
of overhead electrical lines. Contact with or use near
power lines may cause serious injury or electric shock
resulting in death.
This product is in accordance with applicable EC
directives.
This product is in accordance with applicable UK
legislation.
Waste electrical products should not be disposed of
with household waste. Take to an authorized recycler.
Direct Current
V Voltage
mm Millimeter
n No Load Speed
0
EN
7