Safety Symbols; Symbol Meaning; Safety Instructions - EGO Power+ ST1302E Operator's Manual

READ ALL INSTRUCTIONS!
READ & UNDERSTAND
INSTRUCTION MANUAL
Residual risk!
People with electronic devices, such
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING:
To ensure safety and reliability, all
repairs and replacements should be performed by a
qualified service technician.

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to
possible dangers. The safety symbols and the explanations
with them deserve your careful attention and understand-
ing. The symbol warnings do not, by themselves, eliminate
any danger. The instructions and warnings they give are no
substitutes for proper accident prevention measures.
WARNING:
Be sure to read and understand all safety
instructions in this Operator's Manual, including all safety
alert symbols such as "DANGER," "WARNING," and
"CAUTION" before using this tool. Failure to following all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL:
ING, or CAUTION. May be used in conjunction with other
symbols or pictographs.
WARNING:
power tools can result in foreign objects
being thrown into your eyes, which can
result in severe eye damage. Before
beginning power tool operation, always
wear safety goggles or safety glasses with
side shields and a full face shield when
needed. We recommend a Wide Vision
Safety Mask for use over eyeglasses or
standard safety glasses with side shields.

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate.
Indicates DANGER, WARN-
The operation of any
56 VOLT LITHIUM-ION CORDLESS LINE TRIMMER — ST1300E-S
Safety Alert
Read
Operator's
Manual
Wear Eye
Protection
Wear Ear
Protection
Ø2.0 mm
Line Diam-
eter
33cm Cutting
Width
No Cutting
Blade
Ingress
IPX4 Protection
Degree
Keep
Bystanders
Away
Keep
Bystanders
Away
V Volt
A Amperes
Hz Hertz
W Watt
min Minutes
Alternating
Current
Direct
Current
No Load
n
Speed
0
... /min Per Minute
Precautions that involve your
safety.
To reduce the risk of
injury, user must read and
understand operator's manual
before using this product.
Always wear safety goggles
or safety glasses with side
shields and a full face shield
when operating this product.
Always wear ear protection
when operating this product.
The Diameter of the nylon
cutting line
The Max. cutting width of
line trimmer
Do not install metal or plastic
cutting blades
Protection from splashing
water
Ensure that other people and
pets remain at least 15m
away from the line trimmer
when it is in use.
Ensure that other people and
pets remain at least 15m
away from the line trimmer
when it is in use.
Voltage
Current
Frequency (cycles per
second)
Power
Time
Type of current
Type or a characteristic of
current
Rotational speed, at no load
Revolutions per minute
EN
5