Page 1
OPERATOR’S MANUAL 56 VOLT LITHIUM-ION COMMERCIAL SHORT FIXED POLE HEDGE TRIMMER MODEL NUMBER HTX5300-P WARNING: To reduce the risk of injury, the user must read and understand the Operator’s Manual before using this product. Save these instructions for future reference.
Page 2
6. Speed 1. Blade Guard 2. Front Handle Indicato 5. Battery- 7. Bluetooth ® status Indicator SPEED Indicator 13. Tip Protector 12. Blade 11. Blade Support 3. Rear Handle 4. Speed Mode Button 10. Front Trigger 8. Rear Trigger 9. Lock-off Lever 15.
Page 3
Speed Indicator Battery- Bluetooth ® status SPEED Indicator Indicator Speed Mode Button Blade Guard Tip Protector Blade...
Page 4
Cutting Head Assembly Power Head Assembly...
°C Degrees Celsius Temperature We recommend a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS SHORT FIXED POLE HEDGE TRIMMER — HTX5300-P...
Such preventive safety measures reduce the risk of starting the machine accidentally. 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS SHORT FIXED POLE HEDGE TRIMMER — HTX5300-P...
◾ Do not expose a battery pack or machine to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause explosion. 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS SHORT FIXED POLE HEDGE TRIMMER — HTX5300-P...
Recommended Storage -20°C – 70°C EGO™ blade. An unbalanced blade causes vibration Temperature that could damage the motor drive unit or cause Recommended Charging 5°C– 40°C personal injury. Temperature 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS SHORT FIXED POLE HEDGE TRIMMER — HTX5300-P...
Before use of this product, familiarize yourself with all operating features and safety rules. 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS SHORT FIXED POLE HEDGE TRIMMER — HTX5300-P...
The low speed mode provides better control of the machine and longer operating time per charge. NOTICE: The speed mode can be set before the machine is turned on OR during operation. 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS SHORT FIXED POLE HEDGE TRIMMER — HTX5300-P...
Page 11
The speed indicator will glow center. solid orange. Release the trigger and wait until the overheated machine cools down and the speed indicator turns green, then restart the machine. 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS SHORT FIXED POLE HEDGE TRIMMER — HTX5300-P...
Most plastics are susceptible to damage from various will be trimmed most easily by using a back-and-forth types of commercial solvents. Use clean cloth to remove motion. dirt, dust, oil, grease, etc. 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS SHORT FIXED POLE HEDGE TRIMMER — HTX5300-P...
Remove the battery pack and the sealing bolts (Fig. M). Lubricating the gear cases through the oil-hole. NOTICE: Don‘t fully fill the gear case with grease. 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS SHORT FIXED POLE HEDGE TRIMMER — HTX5300-P...
Replace with a new blade. Contact EGO service center for blade replacement. ◾ ◾ Loose blade bolts. Tighten the blade bolts. Using a wrench, turn the bolt clockwise to tighten. 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS SHORT FIXED POLE HEDGE TRIMMER — HTX5300-P...
The warranty applies to the original purchaser and applies only to purchases made from authorised EGO Dealers, which can be confirmed on the website store locator. For avoidance of doubt, 3rd party online stores such as eBay, Gumtree, Amazon, etc. are excluded.
Page 16
PSX2500, PTX5100, BHX1001, STX4500, 5 years 2 years BCX4500, EDX2000, HTX5300-P, HTX5300-PA, LBPX8000 Commercial Backpack Battery: BAX1501 3 years 2 years Commercial Charger: CHX5500E 3 years 2 years 56 VOLT LITHIUM-ION COMMERCIAL CORDLESS SHORT FIXED POLE HEDGE TRIMMER — HTX5300-P...
Need help?
Do you have a question about the HTX5300-P and is the answer not in the manual?
Questions and answers