Heat & Glo SUPREME-I25-IFT Installation Manual page 43

MODELS: SUPREME-I30-IFT, SUPREME-I30-BIR, SUPRM-I30LP-IFT, I30X-AU
SUPREME-I30-IFT, SUPRM-I30LP-IFT I30X-AU SRV LOGS
LOG ID SRV PART #
1 SRV2532-711
2 SRV2532-712
3 SRV2532-713
4 SRV2532-714
5 SRV2532-715
NOTICE: To simplify the installation process, use Figure 10A and 10B to positively identify each individual log
before beginning installation. The logs for both will place similarly in the appliance, the natural bark logs are featured
in the figures.
2 2
1 1
Figure 10.A Log Identification (Natural Bark Logs)
LOG #1: Locate the cutout on the end of log 1 and place over the pilot hood and air scoop. The other end of Log #1 will sit
against log pin A. See Figure 12.
PILOT HOOD PILOT HOOD
B B
A A
Figure 11 Empty Firebox with Front Hearth Installed
Heat & Glo • SUPREME-I25/30/35-IFT, SUPREME-I25/30/35-BIR, SUPRM-I30LP-IFT Installation Manual • 2532-980 Rev. AD • 3/24
MOLDED LOG #
32-1
32-2
32-3
32-4
32-5
3 3
4 4
AIR SCOOP AIR SCOOP
C C
D D
5 5
1 1
Figure 10.B Log Identification (Birch Logs)
1 1
Figure 12 Log #1 Installed
3 3
2 2
A A
5 5
4 4
43