Electrolux KEAF2100L User Manual page 12

How to deactivate the rinse aid empty
notification
Make sure the appliance is in user mode.
1. Press the programme button immediately.
The indicator starts to flash.
2. Wait until the indicator
flash and the remaining programme
indicators are off.
The indicator shows the current setting:
• is on = Rinse aid empty
notification is on.
• is off = Rinse aid empty
notification is off.
3. Press the programme button to change
the setting.
4. Press the on/off button to confirm the
setting.
7.4 The rinse aid level
It is possible to set the released quantity of
rinse aid between level 1 (minimum quantity)
and level 8 (maximum quantity). Level 0
deactivates the rinse aid dispenser and no
rinse aid is released. Factory setting: level 5.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press the programme button twice.
The indicator starts to flash.
2. Wait until the indicator
flash and the remaining programme
indicators are off.
The intermittent flashing of the indicator
shows the current setting: e.g. 5 flashes +
pause + 5 flashes = level 5.
3. Press the programme button repeatedly
to change the setting. Each pressing of
the programme button increases the level
number. After reaching the level 8, the
count starts again from the level 0. The
level 0 means that the rinse aid
dispensing is disabled.
4. Press the on/off button to confirm the
setting.
12 ENGLISH
7.5 Acoustic signals
Acoustic signals sound when a malfunction of
the appliance occurs. It is not possible to
deactivate these acoustic signals.
There is also an acoustic signal that sounds
when the programme is completed. By
default this acoustic signal is deactivated but
continues to
it is possible to activate it.
How to activate the acoustic signal for
the end of the programme
Make sure the appliance is in user mode.
1. Press the programme button three times.
The indicator
2. Wait until the indicator
The indicator
3. Press the programme button to change
4. Press the on/off button to confirm the
7.6 AirDry
AirDry improves the drying results with less
energy consumption. During the drying
phase, the door opens automatically and
remains ajar.
continues to
starts to flash.
flash and the remaining programme
indicators are off.
shows the current setting:
• is off = The acoustic signal is off.
• is on = The acoustic signal is on.
the setting.
setting.
continues to