14. ENVIRONMENTAL CONCERNS..............24 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
(average) domestic usage levels. Do not change the specification of this appliance. • The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 13 place settings.
Page 5
ENGLISH Valid for India only: In order to prevent damage of the product, please use the voltage stabilizer. • Warning: this appliance is designed to be installed / connected to a grounding connection in the building. • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power WARNING!
• Disconnect the appliance from the information about the operational mains supply. status of the appliance. They are not • Cut off the mains cable and discard it. intended to be used in other •...
ENGLISH 4. PRODUCT DESCRIPTION Upper spray arm Cutlery basket Lower spray arm Lower basket Filters Upper basket Rating plate The graphic is a general overview. For more details, Salt container refer to other chapters or Air vent documents provided with the Rinse aid dispenser appliance.
5.1 Indicators Indicator Description ECO programme indicator. It indicates the most environmentally friendly programme selection for a normally soiled load. Refer to "Programme selection". Rinse aid indicator. It is on when the rinse aid dispenser needs refill‐ ing. Refer to "Before first use".
Page 9
ENGLISH 6.4 Programmes overview Programme Dishwasher Degree of Programme phases Options load soil 30min Crockery, Fresh • Dishwashing 50 °C • ExtraPower cutlery • Intermediate rinse • Final rinse 45 °C • AirDry Pre-rinse • Prewash Not applicable 90min Crockery, Normal, light‐...
Water (l) Energy (kWh) Duration (min) 1)2) Programme Machine Care 0.511 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
Page 11
ENGLISH • The indicator related to the setting How to navigate in setting is on. mode • The other indicators are off. • The light related to indicates You can navigate in setting mode using the current setting value. MY TIME selection bar. 3.
ENGLISH 7.6 Key tones CAUTION! Do not try to close the The buttons on the control panel make a appliance door within 2 click sound when you press them. You minutes after automatic can deactivate this sound. opening. This can cause damage to the appliance.
8.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid designed specifically for dishwashers. 1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'.
Page 15
ENGLISH 9.3 How to select and start the During the countdown, it is not possible to change the programme selection. programme Pre-rinse When the countdown is complete, the programme starts. 1. To select Pre-rinse, press and hold for 3 seconds. 9.7 How to cancel the delay The light related to the button flashes.
• After 5 minutes if a programme was All buttons are inactive except for the not started. on/off button. 9.11 End of the programme When the programme is complete, the Auto Off function switches the appliance off automatically. 10. HINTS AND TIPS 10.1 General...
ENGLISH 10.3 What to do if you want to • Use the appliance to wash dishwasher-safe items only. stop using multi-tablets • Do not wash the following materials in the dishwasher: wood, horn, pewter, Before you start using separately copper, aluminium, delicate detergent, salt and rinse aid, complete ornamented porcelain and the following steps:...
Page 18
11.1 Machine Care • Do not use abrasive products, abrasive cleaning pads or solvents. Machine Care is a programme designed to clean the appliance interior with 11.4 Cleaning the filters optimal results. It removes limescale and The filter system is made of 3 parts.
Page 19
ENGLISH 11.5 Cleaning the filter of the inlet hose 1. Close the water tap. 2. Turn the fastener (A) clockwise. Disconnect the hose. 5. Make sure that there are no residues of food or soil in or around the edge of the sump.
3. To install the spray arm back, press it downwards. 2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil 11.7 Cleaning the upper spray from the holes.
Page 21
ENGLISH Problem and alarm code Possible cause and solution The programme does not • Make sure that the appliance door is closed. start. • If the delay start is set, cancel the setting or wait for the end of the countdown. •...
Page 22
Problem and alarm code Possible cause and solution Rattling or knocking • The tableware is not properly arranged in the bas‐ sounds from the inside of kets. Refer to basket loading leaflet. the appliance. • Make sure that the spray arms can rotate freely.
Page 23
ENGLISH Problem Possible cause and solution The interior of the appliance • This is not a defect of the appliance. Humidity con‐ is wet. densates on the appliance walls. Unusual foam during wash‐ • Use the detergent designed specifically for dish‐ ing.