Electrolux KEQC7200L User Manual
  1. Manuals
  2. Brands
  3. Electrolux Manuals
  4. Dishwasher
  5. KEQC7200L
  6. User manual

Electrolux KEQC7200L User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
KEQC7200L
EN
Dishwasher
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Electrolux KEQC7200L

Summary of Contents for Electrolux KEQC7200L

  • Page 1 KEQC7200L Dishwasher User Manual...

  • Page 2: Table Of Contents

    13. ENVIRONMENTAL CONCERNS..............26 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
  • Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...

  • Page 4: Safety Instructions

    The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 13 place settings. • If the supply cord is damaged, it must be replaced by •...
  • Page 5 ENGLISH • Make sure that the parameters on the • If the water inlet hose is damaged, rating plate are compatible with the immediately close the water tap and electrical ratings of the mains power disconnect the mains plug from the supply.

  • Page 6: Product Description

    2.6 Disposal peripherals such as baskets and lids. • Concerning the lamp(s) inside this...

  • Page 7: Control Panel

    ENGLISH • When the appliance has a When AirDry is activated malfunction, the red light flashes. during the drying phase, the Beam-on-Floor is off when projection on the floor may the appliance is deactivated. not be completely visible. To see if the cycle is finished, check the control panel.

  • Page 8: Programme Selection

    Indicator Description Drying phase indicator. It is on when you select a programme with the drying phase. It flashes when the drying phase operates. Refer to "Programme selection". 5. PROGRAMME SELECTION 5.1 MY TIME energy and water consumption for crockery and cutlery with normal soil.
  • Page 9 ENGLISH 5.4 Programmes overview Programme Dishwasher Degree of Programme phases EXTRAS load soil Quick Crockery, Fresh • Dishwashing 50 °C • ExtraPower cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • AirDry • Prewash Not applicable Pre-rinse Crockery, Fresh, lightly •...

  • Page 10: Basic Settings

    Consumption values Water (l) Energy (kWh) Duration (min) 1) 2) Programme Quick 9.4 - 11.4 0.57 - 0.69 Pre-rinse 3.7 - 4.5 0.02 - 0.05 9.3 - 11.4 0.82 - 0.94 1h 30min 9.1 - 11.1 1.01 - 1.13 2h 40min 9.2 - 11.2...
  • Page 11 ENGLISH Number Settings Values Description Latest pro‐ Enable or disable the automatic selec‐ gramme selec‐ Off (default) tion of the most recently used pro‐ tion gramme and options. 1) For more details, refer to the information provided in this chapter. You can change the basic settings in How to enter setting mode setting mode.
  • Page 12 6.2 The water softener The water softener should be adjusted according to the hardness of the water in The water softener removes minerals your area. Your local water authority can from the water supply, which would have advise you on the hardness of the water a negative effect on the washing results in your area.
  • Page 13 ENGLISH In case of the high water softener setting, notification for refilling the rinse aid. it may occur also in the middle of the However, for best drying performance, programme, before the rinse (twice always use rinse aid. during a programme). Regeneration If standard detergent or multi-tablets initiation has no impact on the cycle without rinse aid are used, activate the...

  • Page 14: Before First Use

    6.7 Latest programme selection CAUTION! If children have access to You can set the automatic selection of the appliance, we advise to the most recently used programme and deactivate AirDry. The options. automatic opening of the The latest programme that was door may pose a danger.

  • Page 15: Daily Use

    ENGLISH 6. Turn the cap of the salt container CAUTION! clockwise to close the salt container. The compartment (A) is for CAUTION! rinse aid only. Do not fill it Water and salt can come out with detergent. of the salt container when you fill it.
  • Page 16 • The light related to the button is For information about the detergent dosage, refer to • The display shows the updated the manufacturer's programme duration. instructions on the • The ECOMETER indicates the packaging of the product. updated level of energy and water Usually, 20 - 25 ml of gel consumption.

  • Page 17: Hints And Tips

    ENGLISH 3. Close the appliance door to start the the energy consumption and the countdown. programme duration. After closing the During the countdown, it is not possible door, the appliance continues from the to change the delay time and the point of interruption.
  • Page 18 Only then can the water completely Using too much rinse aid results in reach and wash the dishes. bluish layers on the items. • You can use dishwasher detergent, • Make sure that the water softener rinse aid and salt separately or you level is correct.

  • Page 19: Care And Cleaning

    ENGLISH cause them to crack, warp, discolour, • Make sure that the spray arms can pit or rust. move freely before you start a • Do not wash in the appliance items programme. that can absorb water (sponges, 9.6 Unloading the baskets household cloths).
  • Page 20 CAUTION! If unable to remove the foreign objects, contact an Authorised Service Centre. 1. Disassemble the filters system as instructed in this chapter. 2. Remove the filter (C) out of filter (B).

  • Page 21: Troubleshooting

    ENGLISH 8. Put back the filter (B) in the flat filter 2. Wash the spray arm under running (A). Turn it clockwise until it locks. water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. CAUTION! An incorrect position of the filters can cause bad...
  • Page 22 With some problems, the display shows an alarm code. Problem and alarm code Possible cause and solution You cannot activate the • Make sure that the mains plug is connected to the appliance. mains socket. • Make sure that there is no damaged fuse in the fuse box.
  • Page 23 ENGLISH Problem and alarm code Possible cause and solution Technical malfunction of • Switch the appliance off and on. the appliance. The display shows iC0 or iC3. The level of water inside • Switch the appliance off and on. the appliance is too high. •...
  • Page 24 For alarm codes not described in the The PNC can be found on the rating table, contact an Authorised Service plate on the appliance door. You can Centre. also check the PNC on the control panel. Before checking the PNC, make sure the WARNING! appliance is in the programme selection.
  • Page 25 ENGLISH Problem Possible cause and solution Unusual foam during wash‐ • Use the detergent designed specifically for dish‐ ing. washers. • Use a detergent from a different manufacturer. • Do not pre-rinse dishes under running water. Traces of rust on cutlery. •...

  • Page 26: Technical Information

    12. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 10 (1.0) Water supply max 60 °C...
  • Page 28 www.electrolux.com/shop...

Table of Contents