External Sequencer Start/Stop - Kawai MP8 Owner's Manual

EXP Lock
On
Expression Pedal Lock Off: The display briefly shows as follows and the
expression pedal is unlocked.
EXP Lock
Off
Note:
When the EXP Lock is turned on and the expression pedal is used,the
display briefly shows as follows.
EXP Lock
ressL
#Presz[3ll l button
3.8 External Sequencer Start/Stop
You can start and stop the external sequencer connected to the MP8 with
SW button.
First, connect an external sequencer to the MIDI OUT jack on the rear panel
of the MP8. Make sure that the sequencer is capable to receive external
MIDI clock and commands. Check the MIDI implementation chart of the
sequencer if the Recognized column of the System Real Time Clock &
Commands is marked "O (yes)". Consult the owner's manua! of the
sequencer how to set the sequncer to receive external MIDI clock and
commands.
When the SW button is lit the MIDI clock is transmitted
External Sequencer Start: Press the SW button to turn the light on. The
display briefly shows as follows and the external sequencer starts.
External Sequencer Stop: Press the SW button to turn the light off. The
display briefly shows as follows and the external sequencer stops.
Note:
The tempo is contiolled by the Metronome tempo of the MP8. See page
14 for details.