Kawai MP8 Owner's Manual page 9

[EFFECT BUTTONS]
11. SW button
This button turns the assigned function ON or OFF Many different functions can be
assigned to this switch for your convenience.
12. EFX button
This button turns the EFX ON or OFF for the selected zone.
13. REVERB button
This button turns the REVERB ON or OFF for the selected zone.
To change the function or type assigned to the above buttons. press and hold the
desired button to display the currently selected function or type. then use th VALUE
buttons to change it.
[MENU BUTTONS]
14. MENU buttons 3
The MENU buttons are used to enter the edit mode and scroll through all the various
parameters of the MP8. To change a parameter value. use the VALUE buttons.
Pressing both MENU buttons simultaneously will exit from the edit mode.
[DISPLAY]
15. DISPLAY
[VALUE BUTTONS]
16. VALUE buttons
The VALUE buttons are used to change the value ofthe current parameter as indicated
on the DISPLAY.
[SOUND SELECTION & SETUP SELECTION]
17. SOUND button
The SOUND button switches the MP8 to the SOUND mode. The PATCH buttons
will now select any of the 256 internal sounds.
18. SETUP button
The SETUP button switches the MP8 to the SETUPmode. The PATCH buttons will
now select any of the 256 SETUPs.
19. SOUND SELECT buttons
The SOUND SELECT buttons are organized.in two rows of eight buttons and one
row of four ones. In SOUND mode the upper row of buttons is used to select a sound
category and the second & third raws of buttons is used to select the diferent interna!
sounds within each category. In SETUP mode the upper row of buttons is used to
select a bank and the second & third raws of buttons is used to select the diferent
SETUPs within each bank.
[OTHERS]
20. STORE button
The STORE button is used to store the settings of the MP8.
21. SYSTEM button
The SYSTEM button is used to set the system parameters of the MP8.
22. TRANSPOSE button
The TRANSPOSE button is used to turn the TRANSPOSE function ON/OFE