Table of Contents
Advertisement
7. Program Sequencer
The program sequencer is the function that allows
you to save the contents of real time performance
and the progress of the lower keyboard chords by
step for later playback.
This function also enables you to save the playing
while listening to the performance in memory or to
edit recording by step.
The recorded contents can be stored in IC cards
(refer to page 32.).
7.1
Record
The sequencers of SR3 and SR4 are equipped with
the three independent tracks of UPPER,
LOWER
and
PEDAL.
The
contents
recorded
by the in-
dividual tracks are as follows.
(1) UPPER track
@ ON/OFF switch and volume setting in each of
the following blocks:
UPPER SYNTHESIZER, UPPER PRESET INSTRU-
MENT,
UPPER
ORCHESTRA,
UPPER
TIBIA,
EFFECT and UPPER KEYBOARD CONDUCTOR
(PRESET INSTRUMENT and SYNTHESIZER can
be recorded only when the UPPER KEYBOARD
CONDUCTOR is on.)
e TIBIA
EFFECT
(UPPER
CHORUS,
TREMOLO,
UPP.SUS)
@ Upper keyboard ON/OFF
@ ON/OFF of right foot switch in EXPRESSION
PEDAL (during the use of glide effect)
@ REVERB
(2) LOWER track
® ON/OFF switch and volume setting in each of
the following blocks:
LOWER
SYNTHESIZER,
LOWER
PRESET
IN-
STRUMENT,
LOWER
ORCHESTRA,
LOWER
TIBIA, and EFFECT (PRESET INSTRUMENT and
SYNTHESIZER can be recorded only when the
LOWER KEYBOARD CONDUCTOR is on.)
@ TIBIA EFFECT (LOWER CHORUS)
@ ON/OFF switch and volume setting in the left
hand cheek block including
RHYTHM,
and
AUTO
PLAY
ORCHESTRA
(except UPPER,
PEDAL
KEYBOARD
CONDUCTOR,
Arrow
switches, TRANSPOSE,
MIDI, FUNCTION, TAP
TEMPO and ONE TWO PLAY, INTRO/ENDING
to be recorded only in realtime recording.)
@ ON/OFF of TOUCH BAR
@ ON/OFF of left foot switch (Realtime recording
only)
@ ON/OFF of right foot switch (when HAWAIIAN
GUITAR is not selected for the UPPER keyboard.
(Realtime recording only.))
26
@ Lower keyboard ON/OFF
(3) PEDAL track
@ ON/OFF switch and volume setting in each of
PEDAL ORCHESTRA and PEDAL TIBIA block.
@ ON/OFF
switch of PEDAL
KEYBOARD
CON-
DUCTOR
@ Pedal keyboard ON/OFF
Note:
It is impossible to store TOTAL VOLUME, Expression
Pedal setting, TEMPO,
TRANSPOSE,
registration
memory,
TUNE
(SR4 and SR3), TOUCH
effect by
varying the pressure (SR4 only), ONE TWO PLAY and
MIDI.
H Realtime Record
This function allows you to record the playing of
upper and lower keyboards and pedal in real time
on the three independent tracks.
(1) Select the track for recording
(Step 2 operation may be taken ahead of this
step.)
VV EREST
VI
AV
IP even =| VK ower | Wreon
am
CJ
F sraer
7 reat
TIME
END
\~ ERASE +
—
PROGRAM SEQUENCER —
Turn one or plural number of switches of UPPER,
LOWER, and PEDAL on.
Note:
If the lamp blinks, the track is blank. If the lamp lights
up continuously, the track is already recorded. If you
want to record on this track, erase the contents prior
to the recording. (Refer to page 31.)
(2) Turn the REAL TIME switch on.
<A
REST
V1
iv]
=P weren =| F ower! P oon
i
F
C jC IC)
F sas
Vien
:
V
step
CIC ICa
ENO
& ERASE ~
—
PROGRAM SEQUENCER —
(3) Set the registration for the track for recording.
Advertisement
Table of Contents
