8. SYSTEM
I
SYSTEM
8.1 System Menu
Use this mode to set the System parameters of MP8.
To enter the SYSTEM mode, press the SYSTEM button.
Use the MENU buttons to scroll through the System parameters.
[System Parameter]
System Channel
Init. SW
Touch
System Tune
Volume Slider Action
Local Contro! On/Off
Multitimbre On/Off
Receive Channel On/Of
LCD Contrast
LED Brightness
Out Mode
Foot SW
{System Dump]
Dump Current
Dump All
[System Reset]
Reset One SETUP.
Reset All
[System EFX/REVERB]
Reset EFX/REVERB
Save EFX/REVERB
Make sure the SYSTEM button is lit.
Press the MENU buttons until the parameter you want to edit appears in the
DISPLAY.
Set the value of the parameter by using the VALUE buttons.
The value range differs depending on the parameter,
8.2 System Parameters
- The System Menu parameters are global and always stored automatically
when leaving the SYSTEM mode, so there is no need to store them.
41