Fine Tune; Damper; Foot Switch; Expression Pedal - Kawai MP8 Owner's Manual

6.2.21 Fine Tune
Int: This is a fine tuning function for values smaller than a semi-tone.
H Concert Grand Ext: This is used to transmit fine tuning settings to external sound modules.
Fine Ture = [63 Ifthe TX CC is "On", the value is transmitted when a SETUPis recalled.
When the TX CC is "Off", this page won't be displayed.
The value changes from -63 to #63.
6.2.22 Damper
This parameter determines if the damper pedal is active (Norm [Int] / On
[Ext], with natural decay), deactivated (Off) or set to HOLD (On, with steady
sustain level) for the selected zone.
Use the HOLD value, if you don't want a sound to disappear HOLD is only
available for internal Sounds.
6.2.23 Foot Switch
This parameter determines if a Foot Switch connected to the FSW jack is
active (On) or not (Off) for the selected zone. The type of controller assigned
to the footswitch is a common Setup parameter and is used for all zones of a
Setup as a global parameter,
6.2.24 Expression Pedal
This parameter determines if an Expression Pedal connected to the EXP
annert Gerard | jack is active (On) or not (Off) for the selected zone. The type of controller
2 Pedal i assigned to Expression pedal is a common Setup parameter and is used for
all zones of a Setup as a global parameter
6.2.25 Modulation
. This parameter determines if the Modulation Wheel is active (On) or not
H Concert Grand (Off) for the selected zone.
NA
Mod
ulation = On
6.2.26 Bender
This parameter determines if the Bender Wheel is active (On) or not (Off)
Hoeri Grand for the selected zone.
ger = Un
"6.2.27 Transmitting Bender Range (Ext only)
This parameter decides if a Bender Range should be transmitted (On) or not
ternal (Off) when a SETUP is recalled. When the Bender is "Off", this page won't
Praga
Ta Bengrkrng= On be displayed.