Advertisement
Assembling
• Make sure to tighten the front panel knobs during assembly.
• Make sure the appliance is not plugged in when assembling the
appliance.
1
Push the mixing chamber into the
appliance.
2
Point the mixing paddle to the hole in the
main unit. Insert the mixing paddle all the
way into the main unit.
3
Attach the disc holder onto the appliance.
❶ Disc holder safety switch
❷ Disc holder safety switch lever
Note:
• Check that the safety switch ❶ and
safety switch lever ❷ are set as shown in
the illustration to the right.
35 English
Follow below assembling steps to
install the Pasta maker.
Important
1
2
Advertisement
