Advertisement
3
Loosen the front panel control knobs.
Note:
• The front panel is heavy. Take extra caution
when removing it.
4
Disassemble the front panel, the shaping disc,
the shaping disc holder, the mixing paddle, and
the mixing chamber in order.
5
Use a dry cloth to clean fl our residue in the
hole ❶ where the mixing paddle is placed.
6
Clean the shaping disc with the supplied
cleaning tool to remove the dough
residues. After that, you can clean it with
water.
Tip:
• For the spaghetti and fettuccine shaping discs,
put the shaping disc into the freezer for 2
hours. Then use the corresponding cleaning tool to poke out the dough
in the holes.
Note:
• After the shaping disc is taken out of the freezer, make sure to keep it at
room temperature for at least 10 minutes before using it to make pasta.
27 English
5
4
3
2
1
1
Advertisement
