Page 3
LockerPad-G4 Pro User Manual relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages. This manual and the information contained therein may include technical, other inaccuracies or typographical errors.
Page 4
User Manual About the Company ZKTeco is one of the world’s largest manufacturers of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/Floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader door locks.
LockerPad-G4 Pro User Manual Overview LockerPad-G4 Pro is a locker solution core device based on ZKTeco multi biometric technology. It communicates with the Lock Control Board through the RS485 protocol to control the electronic lock. It supports storage and pick-up, shared by internal employees and temporary users such as visitors, and is compatible with the requirements of one person using one compartment and multiple persons using one compartment.
In order to use device smoothly, please set the relevant parameters correctly. See the Default Basic Parameters below. LockerPad-G4 Pro support face recognition, card recognition, QR code recognition and fingerprint verification, But the fingerprint recognition reader and the QR code recognition reader can only choose one of them.
Device Settings chapter of the user manual. Storage and Pick-Up LockerPad-G4 Pro supports four access methods: Face , Card, QR Code and Fingerprint. Advertisement The advertisement supports mixed loop playback of pictures and videos, each picture is displayed for 5 seconds, and switched to playing video after photo display according.
Server Settings The settings used for connecting the PC. Allow Visitor to Use Used to control the user type. Restart Device Used to restart the LockerPad-G4 Pro device. Show Status Bar Show bottom navigation bar. Record History record. User Management This function can be used when the device is in standalone working mode.
It is used for multiple devices to share a set of user data, and only supports importing and exporting user data via U disk. Export Users: After exporting, a ZKTeco folder will be added to the U disk, which contains user data and user registered photos.
LockerPad-G4 Pro User Manual Restart Device After clicking Restart Device button, the LockerPad-G4 Pro device will automatically restart. Show Status Bar After opening, the bottom navigation bar will be displayed for operations such as exiting the locker software and closing advertisements. After the software exits, click on the ZKBioLocker software to enter the locker software interface again.