Beko WTE 5502 BB0BPT User Manual page 20

Discharging the water when the product does not
have an emergency draining hose:
a Place a large container in front of the filter to catch
water from the filter.
b Loosen pump filter (anticlockwise) until water starts
to flow. Fill the flowing water into the container you
have placed in front of the filter. Always keep a piece
of cloth handy to absorb any spilled water.
c When the water inside the machine is finished, take
out the filter completely by turning it.
4 Clean any residues inside the filter as well as fibers,
if any, around the pump impeller region.
5 Install the filter.
6 If the filter cap is composed of two pieces, close the
filter cap by pressing on the tab. If it is one piece,
seat the tabs in the lower part into their places first,
and then press the upper part to close.
20 / EN
Washing Machine / User's Manual