Beko WTE 5502 BB0BPT User Manual page 14

4.6 Special programmes
For specific applications, select any of the following
programmes.
• Полоскание (Rinse)
Use this programme when you want to rinse or starch
separately.
• Отжим+Слив (Spin + Drain)
Use this programme to apply an additional spin cycle
for your laundry or to drain the water in the machine.
Before selecting this programme, select the desired
spin speed and press Start / Pause button. First, the
machine will drain the water inside of it. Then, it will
spin the laundry with the set spin speed and drain the
water coming out of them.
If you wish to drain only the water without spinning
your laundry, select the Pump+Spin programme and
then select the No Spin function with the help of Spin
Speed Adjustment button. Press Start / Pause button.
C
Use lower spin speeds for delicate laundries.
4.7 Temperature selection
Whenever a new programme is selected, the maximum
temperature for the selected programme appears on
the temperature indicator.
To decrease the temperature, press the Temperature
Adjustment button. Temperature will decrease
gradually.
C
If the programme has not reached the heating
step yet, you can change the temperature without
switching the machine to Pause mode.
Indicative values for Synthetics programmes (EN)
Synthetics 60
Synthetics 40
* You can see the washing time of the programme you have selected on the display of the machine. It is normal that small
differences may occur between the time shown on the display and the real washing time.
** Remaining moisture content values may differ according to the selected spin speed.
14 / EN
2,5 45 0,90
2,5 45 0,42
4.8 Speed selection
Whenever a new programme is selected, the
recommended spin speed of the selected programme
is displayed on the spin speed indicator.
To decrease the spin speed, press the Spin Speed
Adjustment button. Spin speed decreases gradually.
Then, depending on the model of the product, "Rinse
Hold" and "No Spin" options appear on the display. See
"Auxiliary function selection" section for explanations
of these options.
Rinse Hold
If you are not going to unload your clothes immediately
after the programme completes, you can use rinse hold
function to keep your laundry in the final rinsing water
in order to prevent them from getting wrinkled when
there is no water in the machine. Press Start / Pause
button after this process if you want to drain the water
without spinning your laundry. Programme will resume
and complete after draining the water.
If you want to spin the laundry held in water, adjust the
Spin Speed and press Start / Pause button.
Program resumes. Water is drained, laundry is spun and
the programme is completed.
C
If the programme has not reached the spinning
step yet, you can change the speed without
switching the machine to Pause mode.
Remaining Moisture
Content (%) **
≤ 1000 rpm
100 /120 45
l l
90 /110 45
l l
Washing Machine / User's Manual
Remaining Moisture
Content (%) **
> 1000 rpm
40
40