RL78 Family RTK7RLG240P00000BJ
RL78/G24 DC/DC LED Control Evaluation Board User's Manual
1.2
Main features of RL78/G24 DC/DC LED Control Evaluation Board
LED lighting system and DC/DC converter control system demonstration capabilities
•
This board demonstrates constant current control of LEDs by using 16-bit timers KBn( n = 0, 1,
•
2 ) dedicated to PWM output
Back topology
-
Constant current drive of 350 mA ( max. ) x 3 channels
-
5types of dimming control interface supported
•
DALI-2 protocol communication interface
-
DMX512 protocol communication interface ( also available as RDM-DMX )
-
SMbus/PMbus protocol communication interface
-
IR remote control interface
-
3 ch. analog volume control interface (for standalone evaluation)
-
Easy to use device demonstration capabilities
•
The RL78/G24 DC/DC LED Control Evaluation Board contains elements to easily
demonstrate I/O-functions (i.e. LED output, I/O lines, UART serial interface) together with
Real Time Clock (RTC), ADC and Timers. Also, The board has Arduino UNO R3 compatible
interface. Various shields can be connected.
Power supply via 5V DC connector
•
The RL78/G24 DC/DC LED Control Evaluation Board is powered via a 5V DC jack
connector. This power supply is used for power the RL78/I1A as well as the LEDs.
On-Board debugging function
•
The RL78/G24 DC/DC LED Control Evaluation Board supports an On-Board debugging
function by using the IDE, without the need of additional debugging hardware. It allows flash
programming and supports standard debugging functions such as code execution, step
execution, software breakpoints, memory manipulation etc. (The E2 emulator lite can also be
used for on-chip debugging.)
Renesas Flash Programmer (RFP)
•
Windows based Flash programming software allows the user to select and download
application programs to the RL78/G24 DC/DC LED Control Evaluation Board for evaluation
purposes via USB.
R20UT5371EJ0100 Rev.1.00
1. Overview
Page 3 of 30