Table of Contents
Advertisement
Touch Pad
(Advanced)
When you want to re-enable the touch pad
Windows 98
1
In [Control Panel] - [Power Management] - [Advanced], select [Shutdown] for [When
I press the power button on my computer].
2
In [Control Panel] - [System] - [Device Manager], when an external mouse or trackball
device is displayed in [Mouse], press [Remove] to delete it, and then press [OK] to
confirm the deletion.
3
Power off your computer by the power switch and remove the external mouse or
trackball device.
4
Turn the power on and run the Setup Utility (
[Touch Pad] to [Enable] and close the Setup Utility.
5
At the [Add New Hardware Wizard], press [Next].
When the [Add New Hardware Wizard] screen is not displayed:
In [Control Panel] - [System] - [Device Manager], select [touchpad] in [Mouse]
1
and press [Remove] to delete it, then press [OK] to confirm the deletion.
Restart the computer.
2
At the [Add New Hardware Wizard], press [Next].
3
6
Select [Search for the best...], then press [Next].
7
Input [c:\util\drivers\mouse] and then press [Next].
8
Press [Next] and then press [Next].
9
Press [Finish].
10
The display will ask you to restart Windows, press [Yes].
Windows NT
1
Uninstall the driver or application software of an external mouse or trackball de-
vice. (Refer to the operating instructions for the external device.)
2
Power off your computer (
external mouse or trackball device.
3
Turn the power on and run the Setup Utility (
[Touch Pad] to [Enable] and close the Setup Utility.
4
Select [Mouse] in [Control Panel].
5
Select [General] and then press [Change].
6
Press [Have Disk].
7
Input [c:\util\drivers\mouse] and then press [OK].
8
Press [OK], then press [Yes] to confirm the installation.
9
Press [Close].
10
The display will ask you to restart Windows, press [Yes].
Windows 2000
1
Uninstall the driver or application software of an external mouse or trackball de-
vice. (Refer to the operating instructions for the external device.)
If the explanation of uninstalling the driver or application software can not be
found in the operating instructions for the external device, execute the following
steps.
In [Control Panel] - [System] - [Hardware] - [Device Manager], when an external
mouse or trackball device is displayed in [Mice and other pointing devices], press
Del to delete it, and then press [OK] to confirm the deletion.
2
The display will ask you to restart Windows, press [No].
3
Power off your computer (
external mouse or trackball device.
4
Turn the power on and run the Setup Utility (
[Touch Pad] to [Enable] and close the Setup Utility.
Log on to Windows by using the keyboard. (Up to step 7, use the keyboard for all
operations. The touch pad will not function until the computer restarts. Applica-
tions can be changed with Alt + Tab .)
5
At [Digital Signature Not Found] screen*, press Enter .
6
Press Enter to close the wizard screen*.
7
The display will ask you to restart Windows*, press
* When the [Getting Started with Windows 2000] screen is displayed, these screens will be
displayed behind it. Press Enter one after another.
The [Digital Signature Not Found] screen in step
page
54). In [Main] menu, set
"Starting Up/Shutting down") and remove the
page
54). In [Main] menu, set
"Starting Up/Shutting down") and remove the
page
54). In [Main] menu, set
Enter .
5
might not be displayed.
9
Advertisement
Table of Contents
