Table of Contents
Advertisement
Infrared Data Communications
Data Communications
Windows 98
NOTE
Be sure to enable the use of the Infrared Communication Port in the same way for
the computer with which communications will take place. It is possible to confirm
whether infrared communications is possible with another computer by selecting
[Status] in [Start] - [Settings] - [Control Panel] - [Infrared].
1
Position your computer so that the infrared communication
port is face-to-face with the port of another computer
2
Select [My Computer] - [Infrared Recipient] on both computers
3
Press [Send Files] on the computer that will send a file
4
Select the file to be sent, and then press [Open] to commence
the sending of the file
It will be sent to the [My Received Files] folder of the receiving computer.
NOTE
Separate application software is necessary for processing at a transfer speed
of 4 Mbps or when communicating with a computer running Windows 95 or
Windows NT.
Windows 2000
NOTE
Be sure to enable the use of the Infrared Communication Port in the same way for
the computer with which communications will take place. It is possible to confirm
whether infrared communications is possible with another computer by selecting
[File Transfer] in [Start] - [Settings] - [Control Panel] - [Wireless Link].
1
Position your computer so that the infrared communication
port is face-to-face with the port of another computer
2
Double-click [Wireless Link] on the desktop on the computer
that will send a file
3
Select the file to be sent, and then press [Send]
4
Press [Yes] on the computer that will receive the file and after
receiving the file, press [Close]
It will be sent to the desktop of the receiving computer.
NOTE
Infrared communications cannot be performed with a computer running
an Operating System (OS) other than Windows 98 or Windows 2000.
Communications at 4 Mbps is not supported due to the lack of software.
Windows 98
Windows 2000
49
Advertisement
Table of Contents
