Table of Contents
Advertisement
CD-ROM/DVD-ROM Drive
Setting a Disc
Side with title on top
Eject Button
Center Holder
Power-saving Mode
1
Turn your computer on
2
Press the disc eject button and slowly pull out the tray
3
Place the disc securely on the center holder
4
Close the tray
CAUTION
Do not apply excessive force to the tray in the open position, doing so could
damage the tray.
If the CD-ROM/DVD-ROM drive has not been accessed within 30 seconds (in the case of CD-
ROM drive) or 120 seconds (in the case of DVD-ROM drive), the drive motor will automatically
shut down to reduce the power consumption. When the CD-ROM/DVD-ROM drive is ac-
cessed once again, the power of the drive motor is turned on. However, approximately 30
seconds are required until data is actually read from the disc.
NOTE
If the vibration of the CD-ROM/DVD-ROM drive is excessive, set the [CD Drive Speed] to
[Low] in the Setup Utility.
34
Advertisement
Table of Contents
