Table of Contents
Advertisement
Technical Information
Enabling Power Conservation
Windows Security Function
Precautions When Using a CardBus Type LAN Card
Windows NT
Confirm that Phoenix APM 2.0 for Windows NT
displayed in [Control Panel], this means that the program is installed.) If the program is
not installed, be sure to install it. (
Windows NT
Windows NT or Windows 2000 has a security function that differs from the security
function of the Setup Utility. For detailed information, refer to the Windows help.
NOTE
Set the password for secrecy and protection.
Only an account for the Administrator is created the first time the computer is
started. Create accounts for person who is actually going to use a computer.
We recommend using an NTFS file system in order to use the Windows security
function.
Prior to usage, optimize the LAN card settings by following the procedure given below.
Failure to do so may result in an error message being displayed when performing a
copy operation via the LAN card with a computer on the network.
1
Double-click the Network Card you are using from [Network adapters] in [Control
Panel] - [System] - [Hardware] - [Device Manager].
2
Select [Advanced], choose [Store And Forward] from [Property], and then set [En-
abled] for [Value] if it is set to [Disabled].
(This item may be unavailable for some types of network cards.)
®
is installed. (If [APM 2.0 for NT] is
page
24)
Windows 2000
Windows 2000
61
Advertisement
Table of Contents
