Assembly; Handle - Fieldmann FZR 2048 E Manual

EN 10

Assembly

5. ASSEMBLY
Assembly is simple if you follow the instructions below:

5.1 HANDLE

Connect the top and bottom part of the handle using the included screws and nuts with quick coupler levers.
Figure 2. 1 .
Connect the bottom part of the handle to the lawnmower. Figure 2.2.
Attach the power cord to the handle using the plastic clips.
Note:
• The handle is height-adjustable and can be folded down for storage.
5.2 WHEEL ATTACHMENT
Put the lawnmower wheel on to the axle. Figure 3. 1 , pos. 1. Put on the washer and secure in place using the
cotter pin. Figure 3. 1 , pos. 2 and 3. Finally put on the wheel cover. Repeat this procedure for all 4 wheels.
FIG. 2.1
FIG. 3.1
FIG. 2.2
FZR 2048 E