Cx Display Touch Tool - NCR CX3 POS User Manual

CX Display Touch Tool

In CX terminals with multiple touch displays, Windows may have difficulty
assigning the touch devices to the correct display. The CX Display Touch Tool is
used to assign the touch device to its correct display. The tool sets the Windows
display to Extended Desktop and assigns detected touch interfaces to the
corresponding display.
The tool supports the following CX terminals:
NCR CX3 POS (7776)
l
NCR CX5 POS (7773)
l
NCR CX7 POS (7772)
l
The tool is located in the following
location: https://www5.ncr.com//support/support_drivers_
patches.asp?Class=External/CXDisplay%5CTouch%5CTool%5CDisplay
Refer to the Readme document for the installation procedure.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
Confidential and proprietary information of NCR.
78