Table of Contents
Advertisement
KING-METER TECHNOLOGY CO., LT
No.15, Chenchang Road, Beichen Dist.Tianjin,300134, CN
Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378
7.2 General Settings
Press and hold "MODE" button to turn on the display, then hold both "UP" and "DOWN" button for 2
seconds to enter the setting menu.
7.2.1 Single Trip Distance Clearance
"TC" means Single trip distance clearance, the setting parameter can be N / Y. The default setting "N"
means the single trip distance is not cleared. Y / N can be selected by pressing the "UP" and "DOWN"
button. "Y" means the single trip distance needs to be cleared, and "N" means the single trip distance
does not need to be cleared. Press mode to confirm and enter the backlight setting interface.
Single trip distance and single trip time are cleared at the same time.
7.2.2 Backlight Setting
"BL" means backlight. Setting option levels are 1, 2 and 3, level 1 is the lowest brightness. Level 2 is
the standard brightness. Level 3 is highest brightness. The default level is 1. Press "UP" or "DOWN"
button to modify the backlight brightness.
7.2.3 Wheel Size Setting
"LD" means wheel size. The setting option values are: 16, 18, 20, 22, 24, 26, 700C and 28inch. Press
"UP" and "DOWN" to select the value. Select the wheel diameter corresponding to the E-bike to
ensure the accuracy of speed and distance display. Press "MODE" button to confirm then enter the
speed limit setting interface.
8
Advertisement
Table of Contents
