System; 僅 Securing A Child Restraint System With A Lap/Shoulder Belt - Kia Sportage Hybrid 2024 Owner's Manual

Safety features of your vehicle
僅 Always have the ISOFIX (i- Size) sys -
tem inspected by your dealer after an
accident. An accident can damage the
ISOFIX system and may not properly
secure the Child Restraint System.
Securing a Child Restraint System
seat with "Top-tether Anchorage"

system

Type A
ONQ5021012_2
Type B
ONQ5021012R_2
Operation
1. Route the Child Restraint System seat
strap over the seatback.
2. Connect the top-tether to the top-
tether anchorage,
3. Tighten the top-tether according to
the instructions of your Child
Restraint System's manufacturer.
WARNING
Take the following precautions when
installing the top-tether:
僅 Read and follow all installation
instructions provided with your Child
Restraint System.
ISOFIX anchorage and top-tether anchorage (ISOFIX
anchorage system) for children
僅 NEVER attach more than one Child
Restraint System to a single ISOFIX
top-tether anchorage. This could
cause the anchorage or attachment to
come loose or break.
僅 Do not attach the top-tether to any -
thing other than the correct top-tether
anchorage. It may not work properly if
attached to something else.
僅 Child Restraint System anchorages
are designed to withstand only those
loads imposed by correctly fitted
Child Restraint System. Under no cir -
cumstances are they to be used for
adult seatbelts or harnesses or for
attaching other items or equipment to
the vehicle.
Securing a Child Restraint System
with a lap/shoulder belt
When not using the ISOFIX system, all
Child Restraint Systems must be
secured to a rear seat with the lap part
of a lap/shoulder belt.
OCV031029L_2
Operation
1. Place the Child Restraint System on a
rear seat and route the lap/ shoulder
belt around or through the Child
Restraint System.
2. Fasten the lap/shoulder belt latch into
the buckle.
3. Remove as much slack from the belt
as possible by pushing down on the
Child Restraint System whilst feeding
4
4 25