Kia Sportage Hybrid 2024 Owner's Manual page 54

Safety features of your vehicle
and allow the webbing to retract auto -
matically.
ONQ5E021087L
3. Insert the tongue plate into the holder
(1) in seat belt and then insert the mini
tongue into the hole on the belt
assembly cover (2).
ONQ5E021088L
ONQ5E021089L
Adjusting height of the shoulder
belt
ONQ5021018
Operation
1. Pull the height adjuster up (1).
2. Press the height adjuster button (2)
and push the height adjuster down
(3).
4 16
WARNING
僅 After a collision, the seat belt system
should be inspected to ensure it is
operating normally. Replace any belts
that are not functioning appropriately.
僅 Verify the shoulder belt anchor is
locked into position at the appropriate
height. Never position the shoulder
belt across your neck or face.
CAUTION
僅 Do not force to lock the left or right
seat belt into the centre seat belt
buckle. Make sure to lock the rear
centre seat belt into the centre seat
belt buckle. If not, the improperly fas -
tened seat belt will not be able to pro -
vide protection.
僅 When pulling out to wear the seat belt,
the tongue should be slowly pulled
out of the seat belt guide so that the
seat belt guide does not come off the
trim.
NOTICE
If you are not able to pull out the seat
belt from the retractor, firmly pull the
belt out and release it. Then you will be
able to pull the belt out smoothly.
Pre-tensioner seat belt
Your vehicle is equipped with driver's,
front passenger's and rear passengers'
(if equipped) pre-tensioner seat belts.
ONQ5021079R
Seat belts