Rear Panel - Yamaha VL70-m Owner's Manual

!8
DC IN Connector
The DC output cable from the Yamaha PA-3B
AC Power Adaptor supplied with the VL70-m is
plugged in here.
page 15
!9
OUTPUT L/MONO and R Jacks
These are the main stereo outputs from the
VL70-m. Be sure to connect both outputs to the
appropriate channels of a stereo sound system in
order to appreciate the full quality of the VL70-
m sound and effects. The L/MONO jack can be
used alone when connecting to a mono sound
system (e.g. a musical instrument amplifier).
page 22
THRU
14
The Controls & Connectors

Rear Panel

MIDI
OUT IN
@0
@0
MIDI IN, OUT and THRU Connectors
The MIDI IN connector receives the data from
an external sequencer or other MIDI device
which is to control or transmit data to the VL70-
m. The MIDI THRU connector simply re-
transmits the data received at the MIDI IN
connector, allowing convenient chaining of
MIDI devices. The MIDI OUT connector
transmits data corresponding to VL70-m Breath
Controller operation, or bulk data when one of
the MIDI data transmission functions are acti-
vated. The MIDI OUT connector can also be
used to "echo" (re-transmit) data received via
the MIDI IN or TO HOST connectors.
page 16
@1
TO HOST Connector & HOST SELECT Switch
This jack and selector switch allow direct
connection to a personal computer for sequenc-
ing and other music applications — without the
need for a separate MIDI interface.
page 20
HOST SELECT
MIDI Mac
TO HOST DC IN
PC-2 PC-1
@1 !8
OUTPUT
R L/MONO
SER NO.
!9