Setting Up; Power Supply - Yamaha VL70-m Owner's Manual

Setting Up

Power Supply

Your VL70-m comes supplied with a Yamaha PA-3B AC adaptor. Plug the
DC output cable from the AC adaptor into the DC IN jack on the rear panel,
then plug the adaptor into a convenient wall AC power socket. It is also a good
idea to clip the adaptor's DC cable into the cable clip on the VL70-m rear panel
to minimize the possibility of accidentally unplugging the cable during opera-
tion.
CAUTION
• Do not attempt to use an AC adaptor other than the supplied unit or an appropriate
replacement provided by your Yamaha dealer to power the VL70-m. The use of an
incompatible adaptor may cause irreparable damage to the VL70-m, and might pose a
serious shock hazard!
• Be sure to unplug the AC adaptor from the AC mains socket when the VL70-m is not in
use.
HOST SELECT
MIDI Mac
PC-2 PC-1
DC-IN
OUTPUT
TO HOST DC IN R
SER NO.
PA-3B
L/MONO
AC power socket
Setting Up
15