The Voice Play Sub-Control Mode - Yamaha VL70-m Owner's Manual

• Receive Channel
• Bank Pointer
• Program Pointer
34
The VOICE PLAY Mode

The VOICE PLAY Sub-control Mode

The sub control mode can be selected from the main control mode by
simultaneously pressing the PART [-] and [+] buttons. The VOICE PLAY
sub-control mode display looks like this:
PART MIDI
The various parameters in this mode are selected via the SELECT [<] and [>]
buttons. The name of the currently selected parameter appears in the upper right
corner of the display (when the bank and program pointer parameters are
showing a solid triangular pointer indicates which of the two parameters is
selected). A small triangular pointer appears above the icon corresponding to the
selected parameter in the bottom line of the display. Once the desired parameter
has been selected, it's value can be set as required via the VALUE [-] and [+]
buttons.
Rcv CH (Receive Channel)
Settings: 01 ... 16, all
Sets the MIDI receive channel on which the VL70-
m will receive data from your keyboard or other
controller. The receive channel must be set to the
same channel that the controlling device is trans-
mitting on ("01" through "16"), or "all" to allow
reception on all channels.
BANK/PGM VOL EXP PAN REV CHO VAR KEY
• Note Shift
• Variation Send
• Chorus Send
• Reverb Send