FLIR Ex Series Getting Started page 8

2 EN-US English
2.7.1 Disposal of electronic waste
Equipment marked with the below crossed-out wheeled bin is
electrical and electronic equipment. The crossed-out wheeled
bin symbol indicates that waste electrical and electronic
equipment should not be discarded together with unseparated
household waste, but must be collected separately.
2.8 Quick start guide
Follow this procedure:
1. Charge the battery. You can do this in three different ways:
• Charge the battery using the FLIR stand-alone battery charger.
• Charge the battery using the FLIR power supply.
• Charge the battery using a USB cable connected to a computer.
Note Charging the camera using a USB cable connected to a computer
takes considerably longer than using the FLIR power supply or the FLIR
stand-alone battery charger.
2. Push the On/off button
3. Open the lens cap by pushing the lens cap lever.
4. Aim the camera toward your target of interest.
5. Pull the trigger to save an image.
6. To move the images from the camera, use the USB cable.
7. Import the images into a FLIR Thermography software and create an inspec-
tion report.
2.9 Camera parts
See Figure 1.1 Camera parts, page 1.
1. Digital camera lens.
2. Infrared lens.
3. Lever to open and close the lens cap.
4. Trigger to save images.
5. Battery.
#T810136; r. AB/79818/79818; mul
to turn on the camera.
5