FLIR Ex Series Getting Started page 7

2 EN-US English
To download FLIR Thermography software, go to http://www.flir.com/support.
2.5 Training
For training resources and courses, go to
http://www.flir.com/support-center/training.
2.6 Customer support
Do not hesitate to contact our Customer Support Center at http://support.flir.com
if you experience problems or have any questions about your product.
2.7 Safety information
WARNING Applicability: Digital devices subject to 2.1091/2.1093/KDB
447498/RSS-102.
Radiofrequency radiation exposure Information: The radiated output power
of the device is far below the FCC radio frequency exposure limits. Nevertheless,
the device should be used in such a manner that the potential for human contact
during normal operation is minimized.
CAUTION Do not use the camera in temperatures more than +50°C (+122°F),
unless other information is specified in the user documentation or technical data.
High temperatures can cause damage to the camera.
CAUTION Only use a specified battery charger when you charge the battery.
Damage to the battery can occur if you do not do this.
CAUTION The temperature range through which you can charge the battery is
±0°C to +45°C (+32°F to +113°F), except for the Korean market where the ap-
proved range is +10°C to + 45°C (+50°F to +113°F). If you charge the battery at
temperatures out of this range, it can cause the battery to become hot or to break.
It can also decrease the performance or the life cycle of the battery.
Note FLIR Systems AB declares that the radio equipment type FLIR Ex/FLIR
Exxt series is in compliance with Directive 2014/53/EU.
Note Radio operates in standard 802.11 b/g/n in frequency range 2400-2480
MHz and 5150-5260 MHz with max output power 15 dBm.
Note The full text of the Declaration of conformity is available at the following in-
ternet address: http://support.flir.com/resources/2p5q.
#T810136; r. AB/79818/79818; mul 4